Waterjet Copper Cutter

Waterjet copper cutter is mainly composed of super high voltage generator, CNC cutting platform, CNC system and automatic sand supply system.You can rely on your water knife cutting system to complete your copper cutting process.By using these advanced equipment, you will get high quality finishes.Water jets help you produce the perfect output.You will find the perfect shape of the copper sheet.

Since there is no heating area, your copper sheet will not adversely affect it.Instead, laser-cutting systems can cause melting and combustion problems.The water knife does not lead to crack and surface hardness problems.In addition, you will find that the water cutter cutter does not emit harmful gases.

Pump —— Let's start with the foundation, high pressure pump.Each water knife cutter requires a high pressure pump capable of pumping water at a very high speed.The common water knife cutter uses 480 V, 3 phase, 100 A, 60 Hz pumps.High pressure pump is the core of the water knife cutter.It is responsible for pressurizing the current and continuously through the mixing tube.At this point, the supersonic flow of the water jet emerges from the gem-embedded aperture into the copper surface.We can find two pumps in the Waterjet copper cutter, directly driven and based on the supercharger.Most acrylic water knife cutters use a based enhancers.

Cutting head The cutting head of the —— water knife is elongated designed objects with high tolerance values.It helps in cutting at right angles.

Control system —— If the high pressure pump is the heart, then the control system is the brain of the water knife carbon fiber cutter.We use the control system to manipulate and perform all the cutting operations.It contains motion control and nozzle positioning, providing the highest accuracy when cutting copper.

Cutting table The —— cutting table is a solid device that helps in cutting copper.It is equipped with a powder coating.Replacement galvanized metal strips are used to extend their service life.

The automatic feed system water knife cutter requires a continuous abrasive flow to continue the cutting process.This is true for the automatic feeding system.It fills the abrasive container where the pressure system is located.The system delivers the abrasive to the cutter.

CE, ISO: 9001 certification

We will provide you with the packaging of the equipment and the shipping to the designated port.The customer service staff at Witt Services will give you the most timely telephone maintenance support and technical problem guidance.