Waterjet Steel Cutter

Waterjet steel cutter using high precision drive system, including top drive technology, even after widely use can ensure high precision, cutting thickness no limit, thanks to the characteristics of water cutter, cutting steel thickness can reach at least 4 inches, almost perfect edge cutting quality, let you save secondary processing process, effort and time, so as to improve the production.

Y to double support, two-way ball wire rod, straight guide rail drive, to ensure the operation speed and accuracy of the cutting head.

Unique automatic lubrication system with high quality drag chains and special mobile cables, durable.

Pump —— Let's start with the foundation, high pressure pump.Each water knife cutter requires a high pressure pump capable of pumping water at a very high speed.The common water knife cutter uses 480 V, 3 phase, 100 A, 60 Hz pumps.High pressure pump is the core of the water knife cutter.It is responsible for pressurizing the current and continuously through the mixing tube.At this point, the supersonic flow of the water jet emerges from the aperture embedded with gems into the steel surface.We can find two pumps in water jet steel knives, directly driven and based on the supercharger.Most water jet steel knives use enhancers.

Cutting head The cutting head of the —— water knife is elongated designed objects with high tolerance values.It helps in cutting at right angles.

Control system —— If the high pressure pump is the heart, then the control system is the brain of the water knife carbon fiber cutter.We use the control system to manipulate and perform all the cutting operations.It contains motion control and nozzle positioning that provides the highest accuracy when cutting steel.

Cutting table The —— cutting table is a solid equipment that helps in cutting steel.It is equipped with a powder coating.Replacement galvanized metal strips are used to extend their service life.

The automatic feed system water knife cutter requires a continuous abrasive flow to continue the cutting process.This is true for the automatic feeding system.It fills the abrasive container where the pressure system is located.The system delivers the abrasive to the cutter.

CE, ISO: 9001 certification

We will provide you with the packaging of the equipment and the shipping to the designated port.The customer service staff at Witt Services will give you the most timely telephone maintenance support and technical problem guidance.